配置你的第一臺e-mail服務器(2)_Mail服務器教程
[root@testmail /root]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:60:97:DE:E9:99
inet addr:192.168.100.134 Bcast:192.168.100.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:12421 errors:0 dropped:0 overruns:0 frame:0
TX packets:5 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
Interrupt:10 Base address:0xe000
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:6 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
可以看到這臺主機的eth0的ip地址是192.168.100.134.現在修改/etc/SendMail.cf文件來配置SendMail的監聽端口:
# SMTP daemon options
O DaemonPortOptions=Port=smtp,Addr=127.0.0.1, Name=MTA
更改為
O DaemonPortOptions=Port=smtp,Addr=192.168.100.134, Name=MTA
改完后保存退出,并且重新啟動SendMail服務:
[root@testmail /root]# /etc/init.d/SendMail restart
Shutting down SendMail: [ OK ]
Starting SendMail: [ OK ]
[root@testmail /root]#
現在可以用netstat -nl來查看是不是已經更改了.如你所看到的,SendMail的監聽端口現在是eth0的ip地址:192.168.100.134了.
[root@testmail /root]# netstat -nl
Active Internet connections (only servers)
Proto Recv-Q send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:32768 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:111 0.0.0.0:* LISTEN
tcp 0 0 0.0.0.0:22 0.0.0.0:* LISTEN
tcp 0 0 192.168.100.134:25 0.0.0.0:* LISTEN
udp 0 0 0.0.0.0:32768 0.0.0.0:*
udp 0 0 0.0.0.0:667 0.0.0.0:*
udp 0 0 0.0.0.0:111 0.0.0.0:*
Active UNIX domain sockets (only servers)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 1119 /dev/gpmctl
unix 2 [ ACC ] STREAM LISTENING 1172 /tmp/.font-unix/fs7100
[root@testmail /root]#
///////////////////////////////////////////////////////////////
現在SendMail已經可以接收來自外部的連接了.我們還需要設定SendMail允許接收的域名.這個可以在/etc/mail/local-host-names文件中設定.就把域名輸入進去就可以了:
# local-host-names - include all aliases for your machine here.
blank.com
保存退出后重新啟動SendMail服務:/etc/init.d/SendMail restart .這樣SendMail就可以接收來自多個域的信件了.
如果你需要再增加新的域,只有修改這個文件就可以了.
- qmail+vpopmail+sqwebmail的安裝步驟(1)
- 分布式的Qmail郵件系統(2)
- 以Procmail-Gateway過濾寄出信件病毒(2)
- QMAIL+MH設計方案(2)
- Webmail攻防實戰(8)
- 用WebEasyMail架構Web郵件服務器(3)
- 分布式的Qmail郵件系統(1)
- 構建反病毒反垃圾郵件系統(二)
- 配置你的第一臺e-mail服務器(4)
- Win2003自帶mail服務器配置詳細過程
- 用WebEasyMail架構Web郵件服務器(4)
- 電子郵件系統收發不正常的常見原因
- 相關鏈接:
- 教程說明:
Mail服務器教程-配置你的第一臺e-mail服務器(2)。